Congratulations to our top contributing members for August 2014! They have been hard at work submitting, rating, and discussing images on WallpaperFusion, and have racked up some impressive reputation scores along the way!
|
Contributors
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
JigsawMania
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
Check out the current top members or look at previous months on our Top Members page!
When using a setup with many monitors, managing the mouse cursor can get a bit unwieldy. Moving the mouse from the left monitor in a 4+ monitor setup can be tedious. In setups where the monitors are arranged vertically, it can be difficult to hit the caption buttons of a maximized application on the bottom monitor. And in setups where a monitor is located in a different room, it can be difficult to get the mouse cursor over to the isolated monitor.
DisplayFusion has a bunch of mouse cursor related Functions that can help in those situations and more!
In the example where you have two monitors, arranged vertically, it can be difficult to hit the caption buttons on a window located on the bottom monitor quickly, as the mouse cursor will move to the monitor above if you move it one pixel too far. For this type of setup, the "Lock/Unlock Mouse Cursor to Current Monitor" and "Lock/Unlock Mouse Cursor to Current Window" are very helpful. You can press the key combination for one of those Functions (assign the combo on the Settings > Functions tab), and the mouse cursor will be "stuck" inside the confines of that monitor or application window, until you press the key combination again.
When you have many monitors connected to your machine, or monitors that are physically located in a different area where you can't see them, it can be tedious and difficult to get the mouse cursor to the monitor that you need it to be on. The "Move Mouse Cursor to…" Functions make it easy to get the mouse cursor to a specific monitor, or to the active application window. Here's a list of those Functions and what they do when you press their associated key combination (set the key combos on the Settings > Functions tab):
Using DisplayFusionCommand.exe (version 3.3+) you can control DisplayFusion from an external program or command prompt. DisplayFusionCommand.exe is located in the DisplayFusion installation folder (C:\Program Files\DisplayFusion by default). You can find the syntax and examples below.
-closeall
Closes all DisplayFusion instances with no prompts.
-wallpaperloadprofile "profile name"
Loads the Wallpaper Profile named in the quotes. (v3.4.0+)
-wallpapernextimage
Loads the next random Wallpaper image, if random images are enabled for any of the monitors. (v3.4.0+)
-wallpaperpause
Pauses wallpaper changes, if random images are enabled for any of the monitors. (v7.3.1+)
-wallpaperapply
Re-applies the current Wallpaper Profile. (v8.0+)
-wallpapertoggle
Enables/disables the DisplayFusion Desktop Wallpaper feature. When disabling, the wallpaper will be changed to a solid black background. (v8.0+)
-wallpaperanimationstoggle
Pauses/resumes animated wallpaper sources (My Videos, Website). (v8.0+)
-applicationhooksload
Forces DisplayFusion to load the global application hooks. (v3.4.0+)
-applicationhooksunload
Forces DisplayFusion to unload the global application hooks. (v3.4.0+)
-windowwallpaper
Opens the DisplayFusion Wallpaper window. (v3.4.0+)
-windowsettings
Opens the DisplayFusion Settings window. (v3.4.0+)
-windowmonitorconfig
Opens the DisplayFusion Monitor Configuration window. (v3.4.0+)
-windowscreensaversettings
Opens the DisplayFusion Screen Saver Settings window. (v3.4.0+)
-applywindowslockscreen
Re-applies the Windows Lock Screen image as set in the DisplayFusion Settings. (v9.0+)
-monitorloadprofile "profile name"
Loads the Monitor Profile named in the quotes. (v3.4.1+)
-functionrun "hotkey name"
Runs the specified DisplayFusion HotKey. (v4.0+)
-desktopiconsave "profile name"
Saves the current Desktop Icon Layout as a profile. Specifying the name of an existing profile will prompt to overwrite. (v4.0+)
-desktopiconload "profile name"
Loads the specified Desktop Icon Layout Profile. (v4.0+)
-windowpositionprofilesave "profile name"
Saves the currently opened windows as a Window Position Profile Profile. Specifying the name of an existing profile will prompt to overwrite. (v9.2+)
-windowpositionprofileload "profile name"
Loads the specified Window Position Profile Profile. (v9.2+)
-settingsbackup "file path"
Saves the current DisplayFusion Settings to a .reg file. If you don't specify a file name, the backup will be created in the default location of %USERPROFILE%\Documents\DisplayFusion Backups. (v5.1+)
Examples:
DisplayFusionCommand.exe -closeall
Closes all DisplayFusion instances.
DisplayFusionCommand.exe -wallpaperloadprofile "Horse Pictures"
Loads a pre-configured Wallpaper profile named "Horse Pictures"
DisplayFusionCommand.exe -wallpaperloadprofile "Horse Pictures" -wallpapernextimage
Loads a Wallpaper profile, then loads the next random image
DisplayFusionCommand.exe -functionrun "Start Screen Saver"
Runs the built-in DisplayFusion Function that starts the Screen Saver
DisplayFusionCommand.exe -settingsbackup "C:\Backups\DisplayFusionBackup.reg"
Saves the current DisplayFusion Settings to C:\Backups\DisplayFusionBackup.reg
Congratulations to our top contributing members for July 2014! They have been hard at work submitting, rating, and discussing images on WallpaperFusion, and have racked up some impressive reputation scores along the way!
|
Contributors
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
JigsawMania
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
Check out the current top members or look at previous months on our Top Members page!
DisplayFusion ADMX Templates (v4.1+) are available for controlling the settings below via Group Policy in Active Directory environments. Click here to download the latest version of the ADMX templates. Note that while v4.1 was the first to support Active Directory Group Policy, we add new policy settings with each new version of DisplayFusion. For full compatibility with the latest DisplayFusion ADMX templates, please make sure your client machines are running the latest version of DisplayFusion.
The following registry values can be created manually, deployed via registry script, or using the DisplayFusion ADMX Templates (v4.1+), in order to force the settings on the client. The registry location(s) where they can be created are indicated for each one, using the following legend.
If you have any questions at all, feel free to contact us.
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | LicenseKey |
| Type: | REG_SZ |
| Values: | A valid license key |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-CheckForUpdates |
| Type: | REG_SZ |
| Values: | 0: The "Check for Updates Now" button will be enabled 1: The "Check for Updates Now" button will be disabled |
| Versions: | 4.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | DisableCrashReportingAndTelemetry |
| Type: | REG_SZ |
| Values: | 0: DisplayFusion will send anonymous crash reports 1: DisplayFusion will not send anonymous crash reports |
| Versions: | 9.6.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | DisableBackupAuto |
| Type: | REG_SZ |
| Values: | 0: DisplayFusion will automatically backup the settings each time it updates to a new version 1: DisplayFusion will not automatically backup the settings each time it updates to a new version |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-BackupSettings |
| Type: | REG_SZ |
| Values: | 0: The "Backup Settings" button will be enabled 1: The "Backup Settings" button will be disabled |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-RestoreSettings |
| Type: | REG_SZ |
| Values: | 0: The "Restore Settings" button will be enabled 1: The "Restore Settings" button will be disabled |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Advanced |
| Type: | REG_SZ |
| Values: | 0: The "Advanced Settings" button will be enabled 1: The "Advanced Settings" button will be disabled |
| Versions: | 5.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-AudioDevices |
| Type: | REG_SZ |
| Values: | 0: The "Audio Devices" item will not be removed from the context menu 1: The "Audio Devices" item will be removed from the context menu |
| Versions: | 9.2.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-SocialButtons |
| Type: | REG_SZ |
| Values: | 0: The social buttons (Facebook, Twitter, etc) will show up in the Settings window 1: The social buttons (Facebook, Twitter, etc) will not show up in the Settings window |
| Versions: | 9.3+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-MenuExit |
| Type: | REG_SZ |
| Values: | 0: The "Exit" item will not be removed from the context menu 1: The "Exit" item will be removed from the context menu |
| Versions: | 6.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-MenuTaskManager |
| Type: | REG_SZ |
| Values: | 0: The "Task Manager" item will not be removed from the context menu 1: The "Task Manager" item will be removed from the context menu |
| Versions: | 6.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-DesktopIconProfiles |
| Type: | REG_SZ |
| Values: | 0: The Desktop Icon Profiles feature will not be disabled 1: The Desktop Icon Profiles feature will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperEnabled |
| Type: | REG_SZ |
| Values: | 0: The Desktop Wallpaper feature will be disabled 1: The Desktop Wallpaper feature will be enabled |
| Versions: | 8.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | WallpaperAutoFixImages |
| Type: | REG_SZ |
| Values: | 0: Wallpaper autofix will be disabled 1: Wallpaper autofix will be enabled |
| Versions: | 8.1.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Wallpaper |
| Type: | REG_SZ |
| Values: | 0: The Desktop Wallpaper window will be accessible 1: The Desktop Wallpaper window will not be accessible |
| Versions: | 8.1.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockOnlineManual |
| Type: | REG_SZ |
| Values: | 0: All online image providers will be available when using "Randomly Load from Online Provider" mode 1: No online image providers will be available when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockOnlineRandom |
| Type: | REG_SZ |
| Values: | 0: All online image providers will be available when using "Randomly Load from Online Provider" mode 1: No online image providers will be available when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockFlickrManual |
| Type: | REG_SZ |
| Values: | 0: The Flickr Online Image Provider will be enabled when using "Single Image" mode 1: The Flickr Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockFlickrRandom |
| Type: | REG_SZ |
| Values: | 0: The Flickr Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Flickr Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockVladstudioManual |
| Type: | REG_SZ |
| Values: | 0: The Vladstudio Online Image Provider will be enabled when using "Single Image" mode 1: The Vladstudio Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockVladstudioRandom |
| Type: | REG_SZ |
| Values: | 0: The Vladstudio Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Vladstudio Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockBingImageSearchManual |
| Type: | REG_SZ |
| Values: | 0: The Bing Image Search Online Image Provider will be enabled when using "Single Image" mode 1: The Bing Image Search Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockBingImageSearchRandom |
| Type: | REG_SZ |
| Values: | 0: The Bing Image Search Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Bing Image Search Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockdeviantARTAPIManual |
| Type: | REG_SZ |
| Values: | 0: The deviantART API Online Image Provider will be enabled when using "Single Image" mode 1: The deviantART API Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockdeviantARTAPIRandom |
| Type: | REG_SZ |
| Values: | 0: The deviantART API Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The deviantART API Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockdeviantARTRSSManual |
| Type: | REG_SZ |
| Values: | 0: The deviantART RSS Online Image Provider will be enabled when using "Single Image" mode 1: The deviantART RSS Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockdeviantARTRSSRandom |
| Type: | REG_SZ |
| Values: | 0: The deviantART RSS Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The deviantART RSS Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockDigitalBlasphemyManual |
| Type: | REG_SZ |
| Values: | 0: The Digital Blasphemy Online Image Provider will be enabled when using "Single Image" mode 1: The Digital Blasphemy Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockDigitalBlasphemyRandom |
| Type: | REG_SZ |
| Values: | 0: The Digital Blasphemy Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Digital Blasphemy Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockDropboxManual |
| Type: | REG_SZ |
| Values: | 0: The Dropbox Online Image Provider will be enabled when using "Single Image" mode 1: The Dropbox Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockDropboxRandom |
| Type: | REG_SZ |
| Values: | 0: The Dropbox Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Dropbox Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockMyVideosManual |
| Type: | REG_SZ |
| Values: | 0: The MyVideos Online Image Provider will be enabled when using "Single Image" mode 1: The MyVideos Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockMyVideosRandom |
| Type: | REG_SZ |
| Values: | 0: The MyVideos Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The MyVideos Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockRedditManual |
| Type: | REG_SZ |
| Values: | 0: The Reddit Online Image Provider will be enabled when using "Single Image" mode 1: The Reddit Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 9.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockRedditRandom |
| Type: | REG_SZ |
| Values: | 0: The Reddit Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Reddit Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 9.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockPinterestManual |
| Type: | REG_SZ |
| Values: | 0: The Pinterest Online Image Provider will be enabled when using "Single Image" mode 1: The Pinterest Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockPinterestRandom |
| Type: | REG_SZ |
| Values: | 0: The Pinterest Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Pinterest Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockTumblrManual |
| Type: | REG_SZ |
| Values: | 0: The Tumblr Online Image Provider will be enabled when using "Single Image" mode 1: The Tumblr Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockTumblrRandom |
| Type: | REG_SZ |
| Values: | 0: The Tumblr Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Tumblr Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockUnsplashManual |
| Type: | REG_SZ |
| Values: | 0: The Unsplash Online Image Provider will be enabled when using "Single Image" mode 1: The Unsplash Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockUnsplashRandom |
| Type: | REG_SZ |
| Values: | 0: The Unsplash Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Unsplash Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockWebsiteManual |
| Type: | REG_SZ |
| Values: | 0: The Website Online Image Provider will be enabled when using "Single Image" mode 1: The Website Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockWebsiteRandom |
| Type: | REG_SZ |
| Values: | 0: The Website Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Website Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockLoadFromURLManual |
| Type: | REG_SZ |
| Values: | 0: The Load From URL Online Image Provider will be enabled when using "Single Image" mode 1: The Load From URL Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockLoadFromURLRandom |
| Type: | REG_SZ |
| Values: | 0: The Load From URL Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Load From URL Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockWallpaperAbyssManual |
| Type: | REG_SZ |
| Values: | 0: The Wallpaper Abyss Online Image Provider will be enabled when using "Single Image" mode 1: The Wallpaper Abyss Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockWallpaperAbyssRandom |
| Type: | REG_SZ |
| Values: | 0: The Wallpaper Abyss Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Wallpaper Abyss Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockGoogleImageSearchManual |
| Type: | REG_SZ |
| Values: | 0: The Google Image Search Online Image Provider will be enabled when using "Single Image" mode 1: The Google Image Search Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockGoogleImageSearchRandom |
| Type: | REG_SZ |
| Values: | 0: The Google Image Search Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Google Image Search Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlock500pxManual |
| Type: | REG_SZ |
| Values: | 0: The 500px Online Image Provider will be enabled when using "Single Image" mode 1: The 500px Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlock500pxRandom |
| Type: | REG_SZ |
| Values: | 0: The 500px Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The 500px Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockWallpaperFusionManual |
| Type: | REG_SZ |
| Values: | 0: The WallpaperFusion Online Image Provider will be enabled when using "Single Image" mode 1: The WallpaperFusion Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockWallpaperFusionRandom |
| Type: | REG_SZ |
| Values: | 0: The WallpaperFusion Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The WallpaperFusion Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockZenfolioManual |
| Type: | REG_SZ |
| Values: | 0: The Zenfolio Online Image Provider will be enabled when using "Single Image" mode 1: The Zenfolio Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockZenfolioRandom |
| Type: | REG_SZ |
| Values: | 0: The Zenfolio Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Zenfolio Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 4.0.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockFacebookManual |
| Type: | REG_SZ |
| Values: | 0: The Facebook Online Image Provider will be enabled when using "Single Image" mode 1: The Facebook Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockFacebookRandom |
| Type: | REG_SZ |
| Values: | 0: The Facebook Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Facebook Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockGooglePlusManual |
| Type: | REG_SZ |
| Values: | 0: The Google+ Online Image Provider will be enabled when using "Single Image" mode 1: The Google+ Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockGooglePlusRandom |
| Type: | REG_SZ |
| Values: | 0: The Google+ Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Google+ Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockAPODManual |
| Type: | REG_SZ |
| Values: | 0: The Astronomy Picture of the Day Online Image Provider will be enabled when using "Single Image" mode 1: The Astronomy Picture of the Day Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockAPODRandom |
| Type: | REG_SZ |
| Values: | 0: The Astronomy Picture of the Day Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Astronomy Picture of the Day Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockImgurManual |
| Type: | REG_SZ |
| Values: | 0: The Imgur Online Image Provider will be enabled when using "Single Image" mode 1: The Imgur Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockImgurRandom |
| Type: | REG_SZ |
| Values: | 0: The Imgur Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Imgur Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockInstagramManual |
| Type: | REG_SZ |
| Values: | 0: The Instagram Online Image Provider will be enabled when using "Single Image" mode 1: The Instagram Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockInstagramRandom |
| Type: | REG_SZ |
| Values: | 0: The Instagram Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Instagram Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockPixabayManual |
| Type: | REG_SZ |
| Values: | 0: The Pixabay Online Image Provider will be enabled when using "Single Image" mode 1: The Pixabay Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockPixabayRandom |
| Type: | REG_SZ |
| Values: | 0: The Pixabay Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Pixabay Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockSmugmugManual |
| Type: | REG_SZ |
| Values: | 0: The Smugmug Online Image Provider will be enabled when using "Single Image" mode 1: The Smugmug Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockSmugmugRandom |
| Type: | REG_SZ |
| Values: | 0: The Smugmug Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Smugmug Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockSpecialWeatherManual |
| Type: | REG_SZ |
| Values: | 0: The Current Weather Online Image Provider will be enabled when using "Single Image" mode 1: The Current Weather Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockSpecialWeatherRandom |
| Type: | REG_SZ |
| Values: | 0: The Current Weather Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Current Weather Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockSpecialTimeOfDayManual |
| Type: | REG_SZ |
| Values: | 0: The Time of Day Online Image Provider will be enabled when using "Single Image" mode 1: The Time of Day Online Image Provider will be disabled when using "Single Image" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperBlockSpecialTimeOfDayRandom |
| Type: | REG_SZ |
| Values: | 0: The Time of Day Online Image Provider will be enabled when using "Randomly Load from Online Provider" mode 1: The Time of Day Online Image Provider will be disabled when using "Randomly Load from Online Provider" mode |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperLocalImagePathRestrict |
| Type: | REG_SZ |
| Values: | 0: The "Restrict images to specific paths" option will be disabled 1: The "Restrict images to specific paths" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | CleanImageFolders |
| Type: | REG_SZ |
| Values: | 0: The "Remove unused temporary image files automatically" option will be disabled 1: The "Remove unused temporary image files automatically" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | PauseWhenFullScreen |
| Type: | REG_SZ |
| Values: | 0: The "Pause wallpaper changes while a full screen application is running" option will be disabled 1: The "Pause wallpaper changes while a full screen application is running" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | IgnoreRDPChanges |
| Type: | REG_SZ |
| Values: | 0: The "Pause wallpaper changes while in a remote desktop session" option will be disabled 1: The "Pause wallpaper changes while in a remote desktop session" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperPauseBattery |
| Type: | REG_SZ |
| Values: | 0: The "Pause wallpaper changes while computer is running on battery power" option will be disabled 1: The "Pause wallpaper changes while computer is running on battery power" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperAutoRotate |
| Type: | REG_SZ |
| Values: | 0: The "Rotate wallpaper images automatically using JPEG EXIF information" option will be disabled 1: The "Rotate wallpaper images automatically using JPEG EXIF information" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperIgnoreHiddenFiles |
| Type: | REG_SZ |
| Values: | 0: The "Random wallpaper changer ignores hidden files and folders" option will be disabled 1: The "Random wallpaper changer ignores hidden files and folders" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WallpaperUseTransitions |
| Type: | REG_SZ |
| Values: | 0: The "Use transitions when changing wallpaper" option will be disabled 1: The "Use transitions when changing wallpaper" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | CheckWallpaper |
| Type: | REG_SZ |
| Values: | 0: The "Warn me if my wallpaper needs adjusting" option will be disabled 1: The "Warn me if my wallpaper needs adjusting" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-InternetConnectionSettings |
| Type: | REG_SZ |
| Values: | 0: The "Internet Connection Settings" button will be enabled 1: The "Internet Connection Settings" button will be disabled |
| Versions: | 4.1+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-MonitorConfig |
| Type: | REG_SZ |
| Values: | 0: The Monitor Configuration window will not be disabled 1: The Monitor Configuration window will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-MonitorProfiles |
| Type: | REG_SZ |
| Values: | 0: The user will be able to save, load, and manage Monitor Profiles 1: The user will not be able to save, load, and manage Monitor Profiles |
| Versions: | 5.1+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings |
| Type: | REG_SZ |
| Values: | 0: The Settings window will not be disabled 1: The Settings window will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Functions |
| Type: | REG_SZ |
| Values: | 0: The Functions tab will not be disabled 1: The Functions tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-TitleBarDisableContextMenu |
| Type: | REG_SZ |
| Values: | 0: The TitleBar Button Context Menu will not be disabled 1: The TitleBar Button Context Menu will be disabled |
| Versions: | 8.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-FunctionAddScripted |
| Type: | REG_SZ |
| Values: | 0: The Add Scripted button on the Functions tab will not be disabled> 1: The Add Scripted button on the Functions tab will be disabled |
| Versions: | 8.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-FunctionDownload |
| Type: | REG_SZ |
| Values: | 0: The Download Scripted button on the Functions tab will not be disabled> 1: The Download Scripted button on the Functions tab will be disabled |
| Versions: | 8.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Taskbar |
| Type: | REG_SZ |
| Values: | 0: The Taskbar tab will not be disabled 1: The Taskbar tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-StartMenuReplacements |
| Type: | REG_SZ |
| Values: | 0: The Start Menu Replacements list on the Taskbar tab will not be disabled 1: The Start Menu Replacements list on the Taskbar tab will be disabled |
| Versions: | 8.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-WindowsLockScreen |
| Type: | REG_SZ |
| Values: | 0: The Windows Lock Screen tab will not be disabled 1: The Windows Lock Screen tab will be disabled |
| Versions: | 9.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Win8 |
| Type: | REG_SZ |
| Values: | 0: The Windows 8 tab will not be disabled 1: The Windows 8 tab will be disabled |
| Versions: | 8.1.2+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Win10 |
| Type: | REG_SZ |
| Values: | 0: The Windows 10 tab will not be disabled 1: The Windows 10 tab will be disabled |
| Versions: | 9.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Monitor Fading |
| Type: | REG_SZ |
| Values: | 0: The Monitor Fading tab will not be disabled 1: The Monitor Fading tab will be disabled |
| Versions: | 9.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-ScreenSavers |
| Type: | REG_SZ |
| Values: | 0: The Screen Saver tab will not be disabled 1: The Screen Saver tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-WindowSnapping |
| Type: | REG_SZ |
| Values: | 0: The Window Snapping tab will not be disabled 1: The Window Snapping tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-WindowManagement |
| Type: | REG_SZ |
| Values: | 0: The Window Management tab will not be disabled 1: The Window Management tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-AltTab |
| Type: | REG_SZ |
| Values: | 0: The Alt+Tab tab will not be disabled 1: The Alt+Tab tab will be disabled |
| Versions: | 8.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-MouseManagement |
| Type: | REG_SZ |
| Values: | 0: The Mouse Management tab will not be disabled 1: The Mouse Management tab will be disabled |
| Versions: | 8.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-WindowLocation |
| Type: | REG_SZ |
| Values: | 0: The Window Location tab will not be disabled 1: The Window Location tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Compatibility |
| Type: | REG_SZ |
| Values: | 0: The Compatibility tab will not be disabled 1: The Compatibility tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-LicenseKey |
| Type: | REG_SZ |
| Values: | 0: The License Key tab will not be disabled 1: The License Key tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | DisableOurAppsTab |
| Type: | REG_SZ |
| Values: | 0: The "Our Apps" tab will be enabled 1: The "Our Apps" tab will be disabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-RemoteControl |
| Type: | REG_SZ |
| Values: | 0: The "Remote Control" tab will be enabled 1: The "Remote Control" tab will be disabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | RemoteControlEnabled |
| Type: | REG_SZ |
| Values: | 0: The "Enable DisplayFusion Remote Control" setting will be disabled 1: The "Enable DisplayFusion Remote Control" setting will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | RemoteControlAllowCodePopup |
| Type: | REG_SZ |
| Values: | 0: The "Allow security code request popups" setting will be disabled 1: The "Allow security code request popups" setting will be enabled |
| Versions: | 7.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Troubleshooting |
| Type: | REG_SZ |
| Values: | 0: The Troubleshooting tab will not be disabled 1: The Troubleshooting tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Windows8 |
| Type: | REG_SZ |
| Values: | 0: The Windows 8 tab will not be disabled 1: The Windows 8 tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-Languages |
| Type: | REG_SZ |
| Values: | 0: The Languages tab will not be disabled 1: The Languages tab will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-HelpButton |
| Type: | REG_SZ |
| Values: | 0: The Help button will not be disabled 1: The Help button will be disabled |
| Versions: | 5.1+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-SupportRequest |
| Type: | REG_SZ |
| Values: | 0: The Support Request button will not be disabled 1: The Support Request button will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-Settings-ContextMenuItems |
| Type: | REG_SZ |
| Values: | 0: The "Show in Windows desktop context menu" option will not be disabled 1: The "Show in Windows desktop context menu" option will be disabled |
| Versions: | 4.0.0+ |
| Location: | HKCU-Policy, HKLM-Policy |
| Key: | HideTrayIcon |
| Type: | REG_SZ |
| Values: | 0: The system tray icon will not be hidden 1: The system tray icon will be hidden |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | IgnoreFirstRun |
| Type: | REG_SZ |
| Values: | 0: DisplayFusion will show the Welcome Wizard and reset the settings to the defaults the first time it starts 1: DisplayFusion will not show the Welcome Wizard and will not reset the settings to the defaults the first time it starts |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | StartWithWindows |
| Type: | REG_SZ |
| Values: | 0: The "Start with Windows" option will be disabled 1: The "Start with Windows" option will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | BlockUI-BFLogin |
| Type: | REG_SZ |
| Values: | 0: The Binary Fortress Account Login will be enabled 1: The Binary Fortress Account login will be disabled |
| Versions: | 6.1+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | AutoUpdate |
| Type: | REG_SZ |
| Values: | 0: The "Check for updates automatically" option will be disabled 1: The "Check for updates automatically" option will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | AutoUpdateBeta |
| Type: | REG_SZ |
| Values: | 0: The "Check for new Beta versions" option will be disabled 1: The "Check for new Beta versions" option will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | AeroColourMode |
| Type: | REG_SZ |
| Values: | 0: The "Aero Colour Settings" option will be disabled 1: The "Aero Colour Settings" option will be set to change with the wallpaper 1: The "Aero Colour Settings" option will be set to change with the current application |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | EnableHotKeys |
| Type: | REG_SZ |
| Values: | 0: The HotKeys feature will be disabled 1: The HotKeys feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TitleBarButtonsEnabled |
| Type: | REG_SZ |
| Values: | 0: The TitleBar Buttons feature will be disabled 1: The TitleBar Buttons feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarsEnabled |
| Type: | REG_SZ |
| Values: | 0: The Multi-Monitor Taskbar feature will be disabled 1: The Multi-Monitor Taskbar feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarsUseJumpLists |
| Type: | REG_SZ |
| Values: | 0: The "Use Jump Lists" Taskbar option will be disabled 1: The "Use Jump Lists" Taskbar option will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarsDisableAeroTransparency |
| Type: | REG_SZ |
| Values: | 0: The "Disable transparency on all taskbars" option will be disabled 1: The "Disable transparency on all taskbars" option will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarFocusWindowOnDragOver |
| Type: | REG_SZ |
| Values: | 0: The "Focus window when mouse is dragged over Taskbar button" option will be disabled 1: The "Focus window when mouse is dragged over Taskbar button" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarsShowOverFullScreen |
| Type: | REG_SZ |
| Values: | 0: The "Show taskbar in front of full screen applications when they lose focus" option will be disabled 1: The "Show taskbar in front of full screen applications when they lose focus" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarStartMenuOpenOnMonitor |
| Type: | REG_SZ |
| Values: | 0: The "Launch Start Menu shortcuts on current monitor" option will be disabled 1: The "Launch Start menu shortcuts on current monitor" option will be enabled |
| Versions: | 7.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarsPreview |
| Type: | REG_SZ |
| Values: | 0: The "Window Preview Style" option will be set to "Previews disabled, show tooltip on hover" 1: The "Window Preview Style" option will be set to "Windows default" 2: The "Window Preview Style" option will be set to "Windows Vista" 3: The "Window Preview Style" option will be set to "Previews disabled, show group list on hover" |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarsMode |
| Type: | REG_SZ |
| Values: | 0: The "Taskbar Mode" option will be set to "All Taskbars show relevant" 1: The "Taskbar Mode" option will be set to "Windows Taskbar shows all, DisplayFusion shows relevant" 2: The "Taskbar Mode" option will be set to "All Taskbars show all windows" 3: The "Taskbar Mode" option will be set to "Windows Taskbar shows none, DisplayFusion shows all" |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | TaskbarsMiddleClick |
| Type: | REG_SZ |
| Values: | 0: The "Taskbar Button Middle-Click Behaviour" option will be set to "Do nothing" 1: The "Taskbar Button Middle-Click Behaviour" option will be set to "Open new instance" 2: The "Taskbar Button Middle-Click Behaviour" option will be set to "Close application" 3: The "Taskbar Button Middle-Click Behaviour" option will be set to "Move to next monitor" 4: The "Taskbar Button Middle-Click Behaviour" option will be set to "Move to previous monitor" |
| Versions: | 7.3.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MonitorFadingEnabled |
| Type: | REG_SZ |
| Values: | 0: The Monitor Fading feature will be disabled 1: The Monitor Fading feature will be enabled |
| Versions: | 9.2.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MonitorFadingMode |
| Type: | REG_SZ |
| Values: | 1: The "Monitor Fading Mode" option will be set to "Fade All Monitors" 2: The "Monitor Fading Mode" option will be set to "Fade Non-Primary Monitors" 3: The "Monitor Fading Mode" option will be set to "Fade Non-Current Monitors" 4: The "Monitor Fading Mode" option will be set to "Fade Everything Except Current Window" |
| Versions: | 9.2.2+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | ScreenSaversEnabled |
| Type: | REG_SZ |
| Values: | 0: The Screen Saver feature will be disabled 1: The Screen Saver feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WindowSnappingMonitors |
| Type: | REG_SZ |
| Values: | 0: The "Enable Window Edge Snapping to edges of Monitors" Window Snapping option will be disabled 1: The "Enable Window Edge Snapping to edges of Monitors" Window Snapping option will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WindowSnappingOtherApplications |
| Type: | REG_SZ |
| Values: | 0: The "Enable Window Edge Snapping to edges of other Applications" Window Snapping option will be disabled 1: The "Enable Window Edge Snapping to edges of other Applications" Window Snapping option will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MaximizedWindowDragging |
| Type: | REG_SZ |
| Values: | 0: The Maximized Window Dragging feature will be disabled 1: The Maximized Window Dragging feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MaximizedWindowDraggingOverlay |
| Type: | REG_SZ |
| Values: | 0: The Maximized Window Dragging Monitor ID Overlay feature will be disabled 1: The Maximized Window Dragging feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WindowMoveMiddleClick |
| Type: | REG_SZ |
| Values: | 0: The Middle-Click Window Moving feature will be disabled 1: The Middle-Click Window Moving feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MouseWheelScrolling |
| Type: | REG_SZ |
| Values: | 0: The inactive window mouse wheel scrolling feature will be disabled 1: The inactive window mouse wheel scrolling feature will be enabled |
| Versions: | 5.1.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WindowMoveNewProcessWindowsToCurrentMonitor |
| Type: | REG_SZ |
| Values: | 0: The "Move newly opened application windows" option will be disabled 1: The "Move newly opened application windows" option will be enabled |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WindowMoveNewProcessWindowsToCurrentMonitorOnlyFromStartMenu |
| Type: | REG_SZ |
| Values: | 0: The "Move newly opened applications" option (above) will affect all windows 1: The "Move newly opened applications" option (above) will affect only windows opened from the Star menu |
| Versions: | 8.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MouseWrapX |
| Type: | REG_SZ |
| Values: | 0: The left/right monitor edge mouse wrapping feature will be disabled 1: The left/right monitor edge mouse wrapping feature will be enabled |
| Versions: | 5.1.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MouseWrapY |
| Type: | REG_SZ |
| Values: | 0: The top/bottom monitor edge mouse wrapping feature will be disabled 1: The top/bottom monitor edge mouse wrapping feature will be enabled |
| Versions: | 4.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MouseWrapNoSnag |
| Type: | REG_SZ |
| Values: | 0: The mouse cursor snagging prevention feature will be disabled 1: The mouse cursor snagging prevention feature will be enabled |
| Versions: | 5.1.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MoveChildWindows |
| Type: | REG_SZ |
| Values: | 0: DisplayFusion will not attempt to move child windows to the same monitor as the parent window 1: DisplayFusion will attempt to move child windows to the same monitor as the parent window |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MoveChildWindowsModalOnly |
| Type: | REG_SZ |
| Values: | 0: DisplayFusion will move all child windows 1: DisplayFusion will only move modal child windows (windows that block input to the parent) |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | MoveChildWindowsCentre |
| Type: | REG_SZ |
| Values: | 0: DisplayFusion will not try to centre the child window over the parent 1: DisplayFusion will try to centre the child window over the parent |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | AltTabEnabled |
| Type: | REG_SZ |
| Values: | 0: The DisplayFusion Alt+Tab Handler will be disabled 1: The DisplayFusion Alt+Tab Handler will be enabled (Show on Primary Monitor, Show All Windows) 2: The DisplayFusion Alt+Tab Handler will be enabled (Show on All Monitors, Show All Windows) 3: The DisplayFusion Alt+Tab Handler will be enabled (Show on Current Monitor, Show All Windows) 4: The DisplayFusion Alt+Tab Handler will be enabled (Show on Current Monitor, Show Current Windows) |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | AltTabShowItemText |
| Type: | REG_SZ |
| Values: | 0: The DisplayFusion Alt+Tab Handler will not show window titles below the previews 1: The DisplayFusion Alt+Tab Handler will show window titles below the previews |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | AltTabShowDesktopWindow |
| Type: | REG_SZ |
| Values: | 0: The DisplayFusion Alt+Tab Handler will not show window the Desktop window entry 1: The DisplayFusion Alt+Tab Handler will show the Desktop window entry |
| Versions: | 6.0.0+ |
| Location: | HKLM, HKCU-Policy, HKLM-Policy |
| Key: | WindowLocationEnabled |
| Type: | REG_SZ |
| Values: | 0: The Window Location feature will be disabled 1: The Window Location feature will be enabled |
| Versions: | 4.0.0+ |
ShellSend 2.0 is now available for download!
This update adds a new optional parameter at the end to specify the email body text, instead of using a text file for the body text.
We encourage everyone to update to this new version today to take advantage of these improvements. ShellSend is still completely free, so you can update at no charge!
ClipboardFusion 3.0.8 is now available for download! This new version has a few changes, including the following:
We encourage everyone to update to this new version today to take advantage of these improvements. If you've already purchased ClipboardFusion, it's a lifetime license, so you can upgrade to this version at no cost!
If you would like to see a complete list of all the changes, please visit the ClipboardFusion Change Log.
Congratulations to our top contributing members for June 2014! They have been hard at work submitting, rating, and discussing images on WallpaperFusion, and have racked up some impressive reputation scores along the way!
|
Contributors
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
JigsawMania
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
Check out the current top members or look at previous months on our Top Members page!
Update: This sale has ended, thanks everyone!
To celebrate the arrival of summer, we're offering all of our products at a sale price of up to 50% off, until June 30th!
If you're not familiar with all of our apps, feel free to check them out on our More Apps page.
Have an excellent summer, everyone!
ClipboardFusion 3.0.7 is now available for download! This new version has a few minor changes, including the following:
We encourage everyone to update to this new version today to take advantage of these improvements. If you've already purchased ClipboardFusion, it's a lifetime license, so you can upgrade to this version at no cost!
If you would like to see a complete list of all the changes, please visit the ClipboardFusion Change Log.
Login / Register
Binary Fortress
CheckCentral
ClipboardFusion
CloudShow
DisplayFusion
FileSeek
HashTools
LogFusion
Notepad Replacer
Online Base64 Encoder
Online JSON Formatter
ShellSend
TrayStatus
VoiceBot
WallpaperFusion
Window Inspector
